DIRT REPELLENTS AND SEALERS

Fila JET 1L - Protective sealer against dirt for textured porcelain and single-fired ceramic tiles.

Fila Jet 1L. Sealer against dirt for texture porcelain
  • What it is for:

  • Protects natural and textured porcelain stoneware, textured single-fired ceramic tiles, terracotta and rough-finished natural stone from dirt deposits and foot traffic wear.
  • Creates a protective film on the surface.
  • Ideal as a finishing coat for protecting terracotta, natural stone and unpolished agglomerates.
  • Surfaces: textured porcelain.
  • Advantages:

  • Ideal for textured porcelain stoneware floors in high traffic areas.
  • Excellent adhesive power.
  • Performs very well on rough finish porcelain stoneware.
  • High gloss effect without polishing.
  • Application

  • Do not dilute! Ready to use.
  • To protect textured porcelain:

    1. Apply undiluted with a cloth or lambswool applicator and wait until completely dry.
    2. If necessary apply a second coat at right-angles to the first.
    3. Wait until completely dry before walking over the floor. No need to polish.
  • To finish terracotta and stone:

    1. Apply undiluted with a cloth or lambswool applicator and wait until completely dry.
    2. No need to polish.
  • Caution:

  • Do not walk over the floor while drying and do not apply more product to areas which have not yet dried.
  • Coverage:

  • Porcelain - 30 - 40m2

Fila PD15 - Dirt and stain repellent protector for lappato porcelain tiles.

Fila PD15. Dirt repellent protector for lappato porcelain tiles
  • What it is for:

  • Protects the surface from underfoot dirt and heavy traffic.
  • Restores sheen by increasing the material’s surface shine.
  • Makes ordinary maintenance of lappato porcelain tiles easier.
  • Penetrates deep down, protecting the material from water and oily stains.
  • The protection reaches maximum effectiveness after 24 hours.
  • Surfaces: lappato porcelain.
  • Advantages:

  • Specific product for all kinds of lappato porcelain tiles.
  • The protection does not form a film and allows the surface to breathe.
  • Protection is permanent with no need for further application of the product.
  • Ready to use.
  • Highly resistant to traffic and maintenance washing.
  • Does not yellow, UV resistant.
  • High coverage.
  • The product becomes an integral part of the material without altering its appearance.
  • Application

  • Do not dilute! Ready to use.
  • Application after laying on new surfaces:

    1. Wash the floor thoroughly with DETERDEK (cement grouting) or FILACR10 (epoxy grouting).
    2. Apply FILAPD15 to clean dry floor and grouting, covering evenly with a paintbrush, sponge or fleece applicator pad.
    3. Within 10 minutes from application, rub with a sponge, cotton cloth or single-brush machine (white disc), to help the product penetrate and completely remove any residue.
    4. We recommend applying the product to 20 to 30 square foot area at a time.
    5. The surface is ready for use after 8 hours.
  • Application on untreated surfaces to be restored to original appearance:

    1. Wash the floor with FILAPS87 and/or DETERDEK.
    2. Apply FILAPD15 to clean dry floor, following the instructions above.
  • Caution:

  • Do not walk over the floor while drying and do not apply more product to areas which have not yet dried.
  • Coverage:

  • Lappato porcelain - 70m2
download and fila solutions ireland general product catalogue
go to the top