Solvent based colour enhancing stain protector.
What's it for
Suitable for:
Advantages:
Dilution: No dilution required: ready to use
Application:
Apply Fila Stone Plus on dry surfaces using a brush, sponge or other appropriate tool. During application, rub the surface with a sponge or a cloth, so that the product penetrates and any excess can be removed. The floor is ready for use after about 8 hours. To improve colour revival, apply several coats of the product within 8 hour intervals.
Maintenance: diluted solution of Fila Cleaner.
For professional use only:
Spray the product (airless system) on vertical surfaces until they are saturated and use appropriate PPE, as indicated in the safety information sheet.
Please note: Once treated with Fila Stone Plus, the stone surface cannot be restored to its original condition: before treating the surface, carry out a spot test to verify the final colour effect. It is recommended, for external surfaces, to repeat the treatment every year so that the enhancing effect is assured. It does not protect marble and limestone from acid. Do not apply the product externally if rain is forecast.
| Coverage with 1L: | |
| Polished stone | 30-50m² |
| Unpolished stone | 15-25m² |
| Application temp. | +5°C - +30°C |
| Packaging | 250ml & 1L |
| Composition | A mixture of silicon compounds dispersed in de-aromatised hydrocarbon solvent. |
| Warnings: | Keep out of reach of children. Do not disperse into the environment after use. The use of a single-disc cleaning machine is permitted only if it is perfectly undamaged. |
Wet look effect consolidating protector.
What's it for
Suitable for:
Advantages:
Dilution: No dilution required: ready to use.
Application:
On a clean and dry surface, apply one even and continuous coat of Fila Wet with a brush. After 24 hours repeat treatment in the same way. For very absorbent materials, a third coat may be required to reach the desired wet effect.
Maintenance:
Diluted solutions of Fila Cleaner. In the areas most exposed to weather conditions we recommend applying the product again every two years.
Please note: Do not apply the product externally if rain is forecast during the following 24 hours. Do not walk on floor while it's drying: wait 24 hours after last product application. In the areas most exposed to weather conditions we recommend applying the product again every two years. Do not apply on terracotta floors or polished/very smooth surfaces. If product has been wrongly applied or if a thorough cleaning is required, remove Fila Wet using Fila No Paint Star. The product cannot be applied to supports with problems connected with rising damp.
| Coverage with 1L: | 10-20m² |
| Application temp. | +5°C - +30°C |
| Packaging | 1L |
| Composition | Synthetic resins dispersed in aromatic hydrocarbon solvent. Fixative primers (consolidator). |
| Warnings: | Keep out of reach of children. Do not disperse into the environment after use. If used indoors, it is advisable to ventilate the area well. The use of a single-disc cleaning machine is permitted only if it is perfectly undamaged. Outdoor flooring must be properly laid before being treated and must satisfy all specific requirements, including: adequate sloping, properly executed expansion joints, perfect insulation from underlying ground, proven compatibility with sub-zero temperatures. |
Fila WET remover.
What's it for
Suitable for:
Advantages:
No dilution required: to be used undiluted.
Application:
1. Apply the product directly on the wall with a large, flat paintbrush or using the airless method.
2. Leave for at least 5 minutes.
3. Intervene with mechanical means.
4. Rinse. For best results, use a water-jet cleaner on vertical surfaces and a single-disc cleaning machine on floors. Repeat application of the product and the consequent rinsing, if necessary (for example, on porous surfaces such as brick walls, natural stone etc.&rapr;. To remove possible residues of film-forming products such as WET, WET ECO in the event of incorrect application: simply apply the undiluted product directly onto the surface with a brush or by spraying.
| Coverage with 1L: | |
| Undiluted | 5m² |
| Application temp. | +5°C - +30°C |
| Packaging: | 1L |
| Contains: | Alcohols C12-14, ethoxylated. PROPYLENE GLYCOL, MONO METHYL ETHER, N-BUTYL ACETATE. |
| Warnings: | Keep out of reach of children. Use only outdoors or in a well-ventilated area. |
