DETERGENTS • CLEANERS • REMOVERS
Fila CLEANER 1 L /5L - Universal floor cleaner.
-
What it is for:
- A gentle detergent for all floors.
- Safe for pretreated and sensitive surfaces.
- Essential for after installation cleaning of acid sensitive material such as polish natural stone or polish agglomerates.
- Surfaces: terracotta, quarry tiles, porcelain stoneware, glazed ceramic tile, concrete, wood, polished and unpolished marble and agglomerates, linoleum, rubber and PVC.
-
Advantages:
- Cleans without damaging the surface.
- When highly diluted (1:200) it leaves no residues and does not require rinsing.
- Highly concentrated: can be diluted according to use.
- Highly biodegradable.
- Ideal for the maintenance of waxed surfaces.
- Diluted min. 1:200 can be used with a floor cleaning machine.
- Ideal for laminated surfaces.
-
How it is used:
- Dilution: as required – from 1:30 to 1:200.
-
Application:
-
- Maintenance: dilute to 1:200 (1 oz per gal water) used with a floor cleaning machine. Does not require rinsing..
- For very dirty floors, dilute to 1:30 - 1:50, then clean the surface with a cloth and scrubbing brush. Remove dirt and rinse.
- For after installation cleaning, dilute 1:30 and spread with a single disc professional cleaner with a soft disc (white or beige) or a floor scrubbing brush.
- Remove the residue with a vacuum drier or cloths.
- Rinse thoroughly.
-
Coverage per litre:
- Maintenance - 1:200 - 1500m2.
- Initial cleaning of stone - 1:30 - 50m2.
DETERDEK 1L - Descaling cleaner for all types of tiles and acid resistant stone.
-
What it is for:
- Removes all grout residues and building-site dirt.
- Eliminates any saline efflorescences from terracotta.
- Removes lime deposits from floors, wall tiles (showers), and bathroom fixtures.
- Penetrating cleaner for outdoor paving.
- All-in-one descaler and detergent: contains high concentrations of surfactants.
- Removes rust stains.
- Surfaces: terracotta, quarry tile, porcelain stoneware, glazed ceramic tile, acid resistant natural stone.
-
Advantages:
- Does not emit fumes that are harmful to users or the environment: a welcome substitute to muriatic acid.
- Does not alter colour or appearance of the surface.
- Cleans without damaging surfaces.
- Does not harm aluminium or steel trims.
- Multi-purpose: terracotta, porcelain stoneware, acid-resistant stone.
- Dual use: according to dilution, can be used as either a detergent or a descaler.
-
How it is used:
- Dilution: 1:5 – 1:10 depending on the amount of dirt to be removed.
-
Application:
- Wet the surface before applying the product.
-
- Spread the diluted product with a scrubbing machine. Floor cleaning machine or rag and leave to act for a few minutes.
- Clean using a single disc professional cleaner fitted the most appropriate disc (e.g.: brown for terracotta) or with a floor cleaning brush.
- Vacuum or wipe up residue.
- Rinse with plenty of clean water.
-
Dilution and coverage per litre:
- Terracotta 1:5 - 10 - 20 m2.
- Porcelain 1:5 - 40m2.
- Natural stone 1:5 - 1:10 - 20-35m2.
Fila DEWAX 5L - Solvent/stripper for removal of solvent based film forming protectors and paste wax.
-
What it is for:
- Can be used to remove incorrectly applied Fila WET or when a thorough cleaning is required.
- Removes paste wax.
- Degreases floors treated with raw linseed oil.
- Surfaces: wood, terracotta, clinker, porcelain stoneware, matt stones and agglomerates, glazed ceramic.
-
Advantages:
- Powerful solvent: rapid acting.
-
How it is used:
- Application:
-
- Pour directly onto the surface to be stripped.
- Leave to act for 15 - 30 seconds.
- Rub vigorously using a scrubbing brush or abrasive pad. Work until the film is completely removed. Repeat if necessary. The surface is clean when it becomes dull in appearance and loses tone.
- Wipe up the liquid with rags.
-
Caution:
- Do not rinse with water! It is recommended that a new protective treatment be applied!
-
Coverage per litre:
- Do not dilute! Ready to use.
- 5m2
Fila MAX 5L - Wax removing solvent cleaner.
-
What it is for:
- Removing old or unidentified protecting coatings. An effective strong wax remover, for use where conventional water-based products are insufficient.
- Recommended above all for removing wax from terracotta and stones, and on stubborn coatings.
- Surfaces: terracotta, clinker, porcelain stoneware, glazed ceramic tiles, concrete, matt stones and agglomerates.
-
Advantages:
- Compared to traditional wax-removers, it can be used with a single-disc cleaning machine because there is no risk of flammability.
- Excellent as an intensive degreaser on floors with ingrained dirt.
-
How it is used:
- Dilution: between 1:1 and 1:5 according to the level of dirt to be removed.
- As an intensive wax-remover:
-
- Dilute in a 1:3 ratio and apply it on the floor.
- Leave for a few minutes, then work with a single-disc cleaning machine fitted with a green pad.
- Vacuum up residues, then rinse thoroughly with clean water.
- To remove stains from porcelain stoneware and to degrease:
- When dealing with old, stubborn treatments, use the product diluted in a 1:1 ratio.
- For deep cleaning.
-
- Dilute in a 1:5 ratio and apply it on the floor.
- Leave for a few minutes, then work with a single-disc cleaning machine.
- Rinse thoroughly.
-
Caution:
- Do not use on resilient surfaces (linoleum, rubber, PVC) or on wooden or methacrylate surfaces and polished marble!
-
Dilution and coverage per litre:
- 1:5 - 20m2
Fila PS87 1L/5L - Degreasing cleaner wax remover.
-
What it is for:
- Diluted: cleans and removes grease from dirty porcelain stoneware, ceramic, natural stone, terracotta and concrete floors.
- Undiluted: removes stubborn stains from porcelain stoneware.
- It is excellent for basic cleaning of acidsensitive stone.
- Ideal for basic cleaning of concrete.
- Wax remover for water based, metal or polishing wax.
- Surfaces: terracotta, quarry tiles, porcelain, glazed ceramic tiles, concrete, linoleum, rubber and PVC, unpolished marble and agglomerates
-
Advantages:
- A 3-in-one solution: stain remover, detergent and wax remover.
- The only product that removes stubborn stains from porcelain stoneware.
- Cleans without damaging the surface.
- Extremely easy to use.
- Removes epoxy grout residues.
-
How it is used:
- Dilution: depending on use.
- To clean all surfaces:
- Dilute 1:10 to 1:20 and apply to the surface. Leave to act for a few minutes then clean with a single disc professional cleaner or a scrubbing brush. Vacuum or wipe up dirt and then rinse with plenty of water. For a deeper clean, dilute to 1:5.
- To remove stains from porcelain stoneware and to degrease:
- Pour undiluted directly onto the mark and over the entire surface of the tile. Allow to dry completely, then wash and rinse.
- To remove wax:
- Dilute 1:5, spread and leave to act for a few minutes. Scrub with a scrubbing brush or a single disc cleaner. Vacuum or wipe up dirt and then rinse with plenty of water.
-
Caution:
- Do not use on new marble or polished stone!
- Do not use on wood!
- Do not use on methacrylate tubs!
- On linoleum: We advise checking the reaction on a small portion of the surface before apllying the product!
-
Coverage per litre:
- Maintenance - 1:20 - 200m2.
- Wax remover - 1:50 - 20m2.
- Initial cleaning of stone - 1:5 - 30m2.
Fila SOLV 1L - Stripper for solvent based wax.
-
What it is for:
- Removes conventional solvent-based wax treatment from terracotta, marble and wooden floors.
- Degreases floors treated with raw linseed oil.
- Gives an even finish when the floor shows signs of opaqueness or streaks due to excessive or improper application of paste waxes.
- Removes residues of stainproofing products from porcelain stoneware, marble or granite floors.
- Removes excess Filaparquet Base from wooden surfaces.
- Can be used to dilute Filaparquet when treating low absorption wood.
- Surfaces: terracotta, quarry tiles, porcelain stoneware, glazed ceramic tiles, wood, polished & unpolished marble and agglomerates, antique stucco.
-
How it is used:
- Application:
-
- Soak a cloth thoroughly.
- Pass it over the surface, taking care to replace the cloth often, so that the wax removed is not spread back onto the floor.
- In the most difficult situations:
- - layers of old wax, stubborn stains or solid deposits, leave to act on the floor for a few minutes and then scrub directly with a brush.
- To restore treatment:
- - apply a coat of the wax originally used for the surface treatment and finish.
-
Coverage per litre:
- Undiluted - 5m2.