Sigma Ireland. Manual tile cutters for professional and amateur tilers, handyman, DIY and hobbist.

Manual tile cutters

Sigma - Serie 3

Manual tile cutter.

Features:

  • Quick change system of the incision grip.
  • Chromed guides, very robust for a perfectly straight incision.
  • Shock absorber for silent work.
  • Predisposed for thin thickness tiles cutting.
  • Driving height adjustable for ergonomic incision of different thicknesses.
  • Measurement bar pivoted at the centre of the cutting line;
    swivelling +45° 0° - 45°
  • Adjustable stop for quick positioning of metric bar to the angles most commonly used.
  • Metric scale with side measure and diagonal measure.
  • Long measuring square for use on right or left.
  • Metric bar with angle and measurement, always close to operator.
  • Reduced volume for transport (optional - carring box).
  • Spring arms to open, for support of large tiles.
  • Aluminum structure, stronger in proportion to length.
  • Ergonomic handles with ball bearings for fast pull or push incision.
  • 6/7 support feet in soft anti-slip rubber, large diameter.

Available cutters:

  • Art 2G - 37cm
  • Art 3B2 - 65cm
  • Art 3C2 - 77cm
  • Art 3D2 - 95cm
Sigma Ireland. Tile cutter Serie 3.
Sigma - Serie 3 "Klick-Klock" System

Manual tile cutter.

Features:

  • Wide foot gap, 100mm, perfect for cutting easily large tiles.
  • The wheel is equipped with a recovery system of side clearance.
  • Sliding surface of the wheel and guide bar, are working with the tool machine, for a perfectly straight incision over the time.
  • Spring system for a cushioned incision, indispensable for the working of tiles with rough or textured surface.
  • Ergonomic handle, optimized for pushing cutting.
  • Gap foot of aluminum alloy, light but rigid, for a effective split.
  • Protection to prevent marks interchangeable.
  • The grip slides on the guide leaning on a ball bearing.
  • The KLICK KLOCK system ensures greater splitting rigidity and a perfect visibility of the cutting wheel.

Available cutters:

  • Art 3E4K - 129cm
Sigma Ireland. Manual tile cutter with klick klock system for large format tiles.
Sigma - Tecnica

This is a high performance manual tile cutter for diagonal and straight cuts on ceramic and porcelain tiles. Available in either a push or pull to cut configuration.

Available cutters:

  • Art 2A3 - 51cm
  • Art 2B3 - 66cm
Sigma Ireland. Tecnica. Manual tile cutter diagonal and straight cuts on ceramic and porcelain tiles.
Sigma - Diagonale

This is a high performance manual tile cutter for diagonal and straight cuts on ceramic and porcelain tiles. Available in either a push or pull to cut configuration.

Available cutters:

  • Art 5A - 51cm
Sigma Ireland. Diagonale. Manual tile cutter diagonal and straight cuts on ceramic and porcelain tiles.
Sigma - Standard

This is a high performance manual tile cutters for diagonal and straight cuts on ceramic and porcelain tiles. Available in either a push or pull to cut configuration.

Available cutters:

  • Art 7A - 33cm (Metal - unpainted)
  • Art 6 - 35cm (Metal - unpainted)
  • Art 5 - 50cm
Sigma Ireland. Standard. Manual tile cutter diagonal and straight cuts on ceramic and porcelain tiles.